Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 40)

The Status Bar
The Status Bar is a fixed component of the Command and Control interface- it constantly displays a summary of the
mediaHUB HD Pro's current activity level regardless of which tab is selected in the Main Window.
Screenshot (reduced for clarity) :
Notes:
The Encode Status indicator includes a time clock showing the elapsed time the unit has been encoding. •
If a pre-defined Profile has been specified (see The Profile Tab), then the Profile's name will be displayed ("Current
Profile"). •
Note that for the Codec/Chroma indicator, MPEG2 is hard-coded in the display. •
The small buttons in the lower right corner of each Status Display are a quick-jump feature.
The button on the Status Panel jumps to the Service menu, and the buttons on the Video and Audio Panels
jump to the Video and Audio menus. ♦
•
API Cross-Reference
The Status indicators displayed on the Status Bar correspond with API commands that can be used to access the same
information during a Telnet session. A cross-reference is provided here.
System Status
Indicator API Command
Encode Status *.ECMD TRA
Decode Status *.DCMD TRA
Service Name *.ECMD SNA
Service Provider *.ECMD SPR
www.adtecdigital.com