Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 35)

SMPTE 259M SD video
SMPTE 272M SD embedded audio
SMPTE 292M HD Video
SMPTE 299M HD embedded audio
Control and Connectivity
Port Detail
GigE MPEG2 or RTP multicast transport egress port
Terminal (COM1) Back end serial port for Adtec service technicians
API (COM2) API Serial Communication interface
Fast Ethernet 10/100 base T ethernet interface
Encoder RS422 Sony 9-pin electrical and protocol tape deck interface
GP IO tally and control port
USB 2.0 not currently supported
Video Sources
SDI (HD-SDI)
SDI Inputs can be in either Standard Definition (SD) or High Definition (HD). •
SDI inputs are autodetected. •
SDI Input Rules:
Input Std-definition (SD)- 720x480 (NTSC) or 720x576 (PAL)
can only encode to SD; it is possible to downscale the image to 704H, 640H, 544H, 528H, 480H, or
352H x 480V ◊
does not at present support H scaling in PAL mode ◊
♦
Input Hi-def (HD)- 1280H x 720p..
can only encode to 1280H x720p; no scaling possible ◊
♦
Input Hi-def (HD)- 1920H x 1080i.
can only encode to 1920H x1080i, or downscale and encode to 1440H x1080i ◊
♦
•
Composite
Composite Inputs are in Standard Definition only.
www.adtecdigital.com