AMETEK CW-M - Manual (Page 11)

M161570-01 2-1
SECTION 2
SPECIFICATIONS
Note: Product specifications are subject to change without notice.
2.1 OUTPUT
Power
CW 801M: 800 VA
CW 1251M: 1250 VA
CW 2501M: 2500 VA
Power Factor of Load: 0 lag to 0 lead
Phase: All models single phase output
Voltage
Ranges: 0 to 135 VAC RMS or 0 to 270 VAC RMS manual switch
(consult factory for custom output voltages)
Accuracy: 1% of range for voltages >5V
Resolution: 0.1V
Total Harmonic Distortion: 0.65% maximum up to 60 Hz; add 0.05%/10 Hz from
60 Hz to 100 Hz; add 0.4%/100 Hz from >100 Hz
AC Noise Level: <50m VRMS typical for CW 801M and CW 1251M,
100m VRMS typical for CW 2501M
Amplitude Stability: ±0.1% of full scale over 8 hours at constant line,
load and temperature after 15 minute warm-up