AMETEK ReFlex Firmware Updates - Manual (Page 4)

Technical Note
ReFlex Power™ Firmware Updates
Document No. M380570-01 Rev B • 1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: [email protected] • Web: www.programmablepower.com
4 of 4
Note: It is recommended that the controller module be updated last when upgrading a system. The reason is that once the
controller is updated, the system will need to be restarted before the update of other modules can continue. This will eliminate an
unnecessary restart.
IMPORTANT: Be familiar with the file names to avoid selecting the wrong files.