AMETEK SL Series Calibration Manual - Manual (Page 14)

Calibration Elgar Electronics Corporation
5. Set the DC Voltage Standard to the Input Voltage value shown in Table
2-8 for the model being calibrated.
6.
Use the
† keys to adjust the load DVM display until it matches the
DMM reading.
7. Repeat steps 1 through 6 (press ª to return to Item 7) until no further
adjustments are necessary for the DVM display to match the DMM
reading.
MODEL Input Voltage MODEL Input Voltage
SLM-60-30-150 60.00V SLH-60-120-600 60.00V
SLM-60-60-300 60.00V SLH-60-120-1200 60.00V
SLM-250-10-300 250.00V SLH-60-120-1800 60.00V
SLM-500-10-300 500.00V SLH-60-240-1200 60.00V
SLM-60-15-75 60.00V SLH-60-240-1800 60.00V
SLH-60-360-1800 60.00V
SLH-500-60-1800 500.00V
Table 2-8. VSense, Range II Gain Adjustment Settings (Item 8)
2-6 SLM/SLH Calibration Manual