Argox PT-90 - Manual (Page 53)

User’s Manual 47
4. Scanning
The PT-9X30 has an integrated laser/2D scanner that reads all major bar code labels with
excellent performance. The trigger key is located in the middle of the unit. There are also two
side-keys to trigger scanner. Press trigger key to activate the laser/2D scanner.
The PT-9X30 has laser/2D scanner engine. Each scanner engine has different barcode settings.
The configurations and scan SDK settings are also different between Laser and 2D scanner.
4.1 Scan Configuration
When it is necessary to change the default barcode symbology for a different application, use
Scan Configuration to change default symbology, place delimiter characters behind scanned
data, and save the settings.
Run this program from Desktop→ Utility→ Scan Configuration which is also accessible via
Start→ Settings→ Control Panel→ Scan Configuration.
Laser Scanner Engine:
Figure 4-1 Laser Scan Configuration -1
Figure 4-2 Laser Scan Configuration -2