Tcp/ip configuration for windows 2000, Configuring your ethernet connection, Tcp/ip configuration for windows 2000 – ARRIS TM722G-CT User Guide User Manual
Page 43
Advertising
TCP/IP Configuration for Windows 2000
Follow these steps to configure the TCP/IP settings on a Windows 2000 operating
system.
Note:
Dialog boxes shown on your computer may differ slightly from those
shown in this procedure.
1 From the computer, select Start > Settings > Network and Dial-up Con-
nections > Local Area Connection.
2 In the Local Area Connections Properties window, highlight TCP/IP by click-
ing on it one time, then click on Properties.
Note: If your computer has more than one Ethernet card, you may have to
select the appropriate Ethernet card in the Connect using: area of the Local
Area Connection Properties window.
Touchstone TM722 Telephony Modem User’s Guide
43
Advertising
This manual is related to the following products: