ARRIS DCX3200MP3 User Guide - Manual (Page 13)

Operation
B
High-Definition Digital STB DCX3200-M P3 • User Guide 6
365-095-17389-x.1
Operation
Turning Power On and Off
Press power on the front panel or the remote control to turn the DCX set-top on or off
(standby). Be sure the remote control is in cable mode by pressing cable before pressing
power.
Changing Channels
You can change channels in three ways:
•
Press channel + or – on the remote control to step through the channel selection.
•
Enter the number of the channel you wish to view using the number keys on the
remote control.
•
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Volume adjustment is available when using the Baseband Audio Outputs. Press volume
+ or – on the remote control to adjust the volume. When you adjust the volume, the
volume scale is displayed on the screen. Press mute on the remote control to toggle the
sound on and off.
For best audio quality when using the analog L/R audio outputs, use the remote control
to set the DCX set-top to approximately three quarters of the maximum volume level and
then adjust the audio levels on external devices such as your TV or A/V receiver.
Interactive Program Guide
The Interactive Program Guide displays information about TV programs and enables you
to access features such as Parental Control or Pay-Per-View. Interactive program guides
can vary with each cable service provider. Refer to the Interactive Program Guide’s
instruction manual for detailed instructions.
M-Card™
The M-Card is required to view cable television programs and interactive on-demand
programs. The M-Card should not be removed.
2