ARRIS DCX3200MP3 User Guide - Manual (Page 18)

B
High-Definition Digital STB DCX3200-M P3 • User Guide 11
365-095-17389-x.1
Connecting an HDTV — Separate Video/Audio Connections
DVI
If your TV has a DVI input, use the DVI connection for your video. Connect a HDMI-to-
DVI adapter or cable to the HDMI out connector on the DCX set-top and the DVI-HDTV
connector on your TV.
Note: A DVI connection supports only the video connection between the DCX set-top
and the HDTV. The DVI connection must be HDCP compatible.
To connect your audio connections with your TV speakers, see the Audio section.
To connect your audio connections for an A/V receiver, see Connecting an A/V Receiver
— Audio .
Component Video (YPbPr)
Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and
DCX set-top.
Note: This connection only supports the video connection between the DCX set-top and
the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the
colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, see the Audio section.
To connect your audio connections for an A/V receiver, see Connecting an A/V Receiver
— Audio .
Audio
If your TV does not have digital audio inputs, connect the stereo audio cable to the audio
L/R connectors on the DCX set-top and the audio L/R connectors on the HDTV.
If your TV supports digital audio inputs, use the digital audio optical S/PDIF or coaxial
S/PDIF outputs instead of the audio L/R outputs. S/PDIF offers better audio quality,
including support for Dolby® Digital audio.
For information on configuring your DCX set-top settings, see
Configuring the User
Settings .