15 glue logic fpga, Functional description – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) User Manual
Page 114
Advertising

Functional Description
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F)
114
The IPMC can access the thermal information of DIMM SPD. At beginning of boot, CPU
dedicated memory I2C bus owns the DIMM SPD for memory parameter reading. IPMC can
access the DIMM SPD for DIMM thermal information through mux control signal.
5.15 Glue Logic FPGA
The Glue Logic FPGA is a programmable logic device used for the following:
Power sequence control
LPC interface under PCH for internal register access
SPI Interface under IPMC for internal register and BIOS access
Reset control logic
Interruption control logic
BIOS bank selection control
Dual UART controller with routing control
Advertising
This manual is related to the following products: