Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (June 2014) - Manual (Page 63)

Chapter 3
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54F) 63
Controls, Indicators, and Connectors
3.1 Faceplate
Figure 3-1 shows the connectors, keys and LEDs available at the Faceplate.
The blade design provides the possibility to cover unused faceplate elements like LEDs or push
buttons behind a custom overlay foil.
3.1.1
LEDs and Interfaces
The blade's faceplate provides the following interfaces and control elements:
 Two USB 2.0 ports
 Serial console port to connect to either payload or IPMC serial I/F
 Out of Service, In Service, Attention, User (U1, U2, U3 LEDS) and Hot Swap LEDs (IPMC
control)
 Two Ethernet ports
 Recessed reset button