Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 189)

BIOS
ATCA-7480 Installation and Use (6806800T17A) 189
The following table contains description about the options that can be configured in SATA
configuration.
USB Configuration
Table 6-5 Advanced >> SATA Configuration
Item Values IPMI Boot parameter Description
SATA Controller Enabled,
Disabled sata Enables/Disables SATA Device.
Operation Mode IDE, AHCI, RAID sata_mode Selects the controllers Operation Mode.
Aggressive LPM Support Enabled,
Disabled sata_alpm Enables/Disables Aggressive Link Power
Management (SALP).
SATA Speed Support 1.5 Gb/s, 3.0
Gb/s, 6.0 Gb/s sata_speed Indicates the maximum speed the SATA
controller can support on its ports (Only
usable in AHCI/RAID mode).
Figure 6-10 USB Configuration