Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 60)

Hardware Preparation and Installation
ATCA-7480 Installation and Use (6806800T17A) 60
Installation Procedure
To install the blade into an ATCA shelf:
1. Visually inspect the blade and backplane connectors for damage or bent pins before
attempting to insert a blade. If any connector damage or pin damage is observed, stop
inserting the blade and send the damaged item to proper repair channels.
2. Slide the latch into the release position and pull out the handle outward to unlatch the
handle from the faceplate. Do not rotate the handle fully outward.
Latch
Handle