Avalon Firestyles Extra Room Power Heat Duct - Manual (Page 4)

Extra Room Power Heat Duct Instructions
SKU 98500769
Page 4 of 11 12/2/13 - 17601067 © Travis Industries, Inc.
Blower Mounted in Floor
Cut a hole between floor joists
for the blower box.
5-1/4"
14"
a b
c
Attach the floor boot to the blower box with the included screws.
Slide the blower into the hole
cut in step "a". Attach with four
screws.
The screws
attach to either
of these pairs of
holes. Use the
upper pair for
thick flooring, the
lower pair for
thin flooring.
Attaching Duct to Fireplace
Attach the starter ring to the fireplace following the directions below (use the most convenient
side - 864TRV has only one opening on the right side).
Bend the tabs on the bottom of
the starter ring up to lock it in
place.
1/4" Nutdriver
Remove and discard the
cover plate.
Starter Ring