Awind wePresent WiPG-1500 User's Manual - Manual (Page 60)

60
Default Gateway: 192.168.100.10
DNS Server: 192.168.100.10
< Wireless Setup>

Wireless LAN: The default setting is “Enable”

SSID: You can change the default SSID and the maximum Length is 32 bytes.

SSID Broadcast: The default value is “Enable”

Channel: You can set a fixed channel or allow auto selection. The “Auto”
selection means after power on wePresent WiPG-1500, it will scan all of
wireless channels and select one clear channel automatically.

Encryption: you can select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA
Enterprise/ WPA2 Enterprise.

Key: If Encryption is enabled, you have to enter a key according to the
encryption mode you selected. (If the length of the key entered is not
sufficient or too long, a warning message will pop up.)

Channel Bandwidth: select from 20M or Auto (20M/40M)
< AP Client>

Connect to Existing AP: The default setting is “Disable”. If you choose “Enbale”
you need to enter the existing AP SSID that you want to connect. When you
select “Enable” option, the following information needs to be entered
accordingly to the existing AP setting:
Encryption: Select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA
Enterprise/ WPA2 Enterprise.
Key: If Encryption is enabled, you have to enter a key according to the
encryption mode you selected. (If the length of the key entered is not
sufficient or too long, a warning message will pop up.)
Note: The Encryption and Key information must be consistent to the exiting
AP configuration.
< Host Name and Domain Name>

Host Name: It will use the same name as SSID for the device host name

Domain Name: You can also enter the domain name of this device if there is
DNS server available.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within
wePresent WiPG-1500 box

“All Block” can block Guest Users(through wireless) to access all office
network(LAN),

“All Pass” can allow Guest Users(through wireless) to access all office
network

“Internet Only” can block Guest Users (through wireless) from office network
(LAN) but still reserve internet connection capability.