Awind wePresent WiPG-1500 User's Manual - Manual (Page 63)

63
10.4.4 OSD Setup
1) Click on “OSD Setup” option, you can:
Change Standby Image

Type: Replace Logo Image: Replace logo image only.
Replace entire standby image: Replace the whole
standby image

<Reset to default>: Restore to default Logo image.

<Image File Upload>: Enter or browse the file name and upload the
customized Logo Image. Please refer to remark on screen when select the
file.
You can also adjust the following “Display Option”

Device Information

Font Size

Screen Saver Settings: Enable or disable the screen saver and also
configure the idle time(Minutes). (default is 5 mins)
<Apply >: Press “Apply” button after configuration, and follow the reboot instruction
when applicable.
<Cancel>: Press button to abort action.