Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 108)

SEWING THE STITCHES
S-34
a
Select a stitch and attach presser foot “G”.
b
Lower the presser foot so that the presser
foot guide is set flush against the edge of the
fabric.
c
Sew along the presser foot guide.
a Guide
■ Overcasting Using Presser Foot “J”
See page S-68 for the detailed information of
stitches.
a
Select a stitch and attach presser foot “J”.
CAUTION
• After the stitch width is adjusted, rotate the
handwheel toward you (counterclockwise).
Check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may break and cause injury.
a The needle should not touch the center bar
• If the presser foot is raised to its highest level,
the needle may strike the presser foot.
Stitch Stitch name Presser foot
Overcasting stitch
Overcasting stitch
Overcasting stitch
Overcasting stitch
Single diamond overcast
Single diamond overcast