Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 138)

SEWING THE STITCHES
S-64
e
Select and sew seam “3” as shown.
→ The fabric feeds forward while stitching backward.
f
Select and sew seam “4” as shown.
→ The seam will be connected to the starting point of
seam 1.
Zipper Insertion
■ Centered Zipper
Use for bags and other such applications.
a
Select .
b
Attach presser foot “J” and sew straight
stitches up to the zipper opening. Change to
a basting stitch (see page S-28) and sew to
the top of the fabric.
a Basting stitches
b Reverse stitches
c End of zipper opening
d Wrong side
c
Press the seam allowance open and attach
the zipper with a basting stitch in the
middle of each side of the zipper tape.
a Basting stitches
b Zipper
c Wrong side
d
Remove presser foot “J”. Align the right
side of the pin in zipper foot “I” with the
presser foot holder, and attach the zipper
foot.
a Right
b Left
c Needle drop position
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” on page S-68.
Note
• Make sure you sew using the middle needle
position.