Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 63)

CONVENIENT SEWING FEATURES BY USING THE SENSOR PEN
Se
ns
or
Fu
nc
tion
s
Basic operations B-61
B
2
By using the sensor pen, you have the option of
four separate functions
• Setting the guideline as a reference for your
sewing position.
• Set the needle position of straight stitch.
• Adjust the width and “L/R SHIFT” position of a
zigzag stitch.
• Set the ending point of a stitch pattern sequence.
a When specifying the end point of your sewing, this
function adjusts your pattern or stitch so that you
end up with a complete or half pattern.
b It is easy to set the pattern width and position.
When connecting the sensor pen to the machine, make sure that the arrow on the sensor pen connector
faces up, aligns with the arrow on the machine, and that the connector is firmly inserted into the jack.
a Sensor pen jack
b Sensor pen connector
CONVENIENT SEWING FEATURES BY USING THE
SENSOR PEN
CAUTION
• The guideline marker is a laser; therefore, do
not stare at the laser light directly. Otherwise
it may cause blindness.
Note
• When the guideline does not appear clearly,
set the brightness of the machine light
dimmer to see them clearly.
Refer to “Using the Machine Setting Mode
Key” on page B-25.
CONNECTING THE SENSOR PEN
CAUTION
• When connecting the sensor pen, make sure
that the arrow on the sensor pen connector
faces up and lines up with the arrow above the
sensor pen jack, otherwise the connector pins
will not align correctly and the connector will
be damaged.
• When connecting or disconnecting the sensor
pen, grab the connector, and then slowly push
it straight in or pull it straight out.
• When disconnecting the sensor pen from the
machine, do not pull on the cord, otherwise
the sensor pen may be damaged.