Dish Network DuoDVR ViP 722_TOC - Manual (Page 54)

Chapter 12
108
Connecting the Phone Line
C
ONNECTING THE
P
HONE
L
INE
You must keep the receiver connected to an active telephone line to order Pay-Per-View
programs, use all of the DishHOME Interactive features, or use other services from DISH
Network with your remote control.
Note: You may be able to use a wireless modem jack. However, this may not support all
the features of this receiver, such as Caller ID. See www.dishnetwork.com for compatible
modem products.
Note: If you have a Digital Subscriber Line (DSL), you may have to install a DSL filter
between the receiver’s back panel P
HONE J ACK and the telephone wall jack to
successfully connect with DISH Network. You can obtain a filter from your DSL provider.
Phone Line Connection
Run a telephone cable with a standard RJ-11 connector from the receiver’s back panel
P
HONE to an active telephone connection as shown below.
Note: Do not connect the phone line to the Ethernet connection.
Phone System Setup
You must set up the receiver for your telephone system (touch tone or rotary), and set a
telephone number prefix, if you need a prefix to make an outside call.
Phone Jack
Optional
Phone Coupler
Phone Jack
Phone Y-Adapter
Optional
Phone Coupler
2
3-4
1
5
Press MENU and
select System Setup,
then Installation,
then Phone System
Select either
No Prefix or
Prefix Code
If your phone
system needs
a prefix code for
an outside line,
enter it under
Prefix
MENU
Select Done
Done
6
Program Guide 1
Themes & Search 2
Customer Support 3
Multimedia 4
Locks 5
System Setup 6
Daily Schedule 7
Preferences 8
Cancel 0
1 Main Menu Thursday, January 20
114 E! 114 E! 6:25 pm
Celebrity Homes 5:30 pm - 7:00 pm NR
Select phone
type
System Setup 6
Installation 1
Phone System 4
Rotary Phone
Touch Tone
Phone Type
Prefix Code
No Prefix
Outside Line
9
Prefix