Dish Network DuoDVR ViP 722_TOC - Manual (Page 9)

Introduction
3
How to Use this Guide
Guide Conventions
• The names of remote control buttons are all uppercase.
Example: Press SAT.
• Select means to move the highlight to an on-screen option or choice in a list and press
SELECT on the remote control.
Example: Select the Locks option.
• This guide uses HD for high-definition and SD for standard-definition.
• Where this guide mentions nearby TV, it is referring to TV1, the TV nearest the
receiver. The nearby TV receives TV1 menus and programming from the receiver’s
TV1 outputs and is connected using short audio/video cables.
• Where this guide mentions remote TV, it is referring to TV2, the cable-ready TV(s)
located in rooms away from the receiver. The remote TV receives TV2 menus and
programming from the receiver’s TV2 outputs through your in-home cable system.
• Where this guide mentions remote control, it refers to either Remote Control 1 when
viewing a nearby TV or Remote Control 2 when viewing the remote TV(s). If a specific
remote control must be used, this guide will refer directly to Remote Control 1 or
Remote Control 2.
• The instructions in this guide are shown in two ways:
– Instructions in the form of pictures are handy if you’d like to learn something
quickly. These instructions are numbered left to right as shown in the sample
below.
– Instructions that are written out are helpful if you’d like to learn more details.
1
2
3
4
Press POWER
on the remote
to begin watching
a program
Press
PAUSE to
pause the
program
Press VIEW LIVE TV
to go to live TV
Press the UP
Arrow to go up
one channel
Sample