Becker TRAFFIC ASSIST Z100 Crocodile - Manual (Page 88)

88
>>> SETTINGS
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Automatic on/off
The Traffic Assist can switch automatical-
ly to sleep mode when the vehicle ignition
is switched off.
Prerequisite:
• The Traffic Assist must be connected to
the vehicle cigarette lighter (see also
page 17).
• The cigarette lighter is de-energized af-
ter the ignition is switched off.
• The relevant function can be switched
on at the Traffic Assist.
Switching the function on / off
> Press the
Automatic on/off button.
Depending on the previous setting, the
function will be switched on or off. The
current setting is shown by the icon.
• Left icon: The function is switched on,
the Traffic Assist switches off automati-
cally.
• Right icon: The function is switched
off, the Traffic Assist does not switch off
automatically.
Sounds
You can switch the Traffic Assist signal
tone on and off. This also includes the
clicking of the touch screen buttons.
> Press the
Tone on or Tone off button.
Depending on the previous setting, the
signal tones are switched on or off.
• Left icon: Tones switched on
• Right icon: Tones switched off
Factory settings
You can reset your Traffic Assist to the
factory settings.
This deletes the following amended data:
Stored destinations, stored routes, the
home address, images, videos etc. stored
in the internal memory.
> Press the Factory reset button.
> Press the Yes button.
The Traffic Assist is reset to the factory
settings.