BECKHOFF AL2000 Linear servomotor - Manual (Page 30)

Mechanical installation
PD
M1M2
= phase distance “Phase L1 / Motor 1” to “Phase L1 / Motor 2”
x = Housing clearance
z = Distance between the mounting holes
Example 2 with AL2006 and AL2012
In example 2 the connecting cables point in the same direction. In this layout the minimum bending radius of
the motor cable must be observed.
PD
M1M2
= phase distance “Phase L1 / Motor 1” to “Phase L1 / Motor 2”
x = Housing clearance
z = Distance between the mounting holes
Linear servomotor AL2xxx 30 Version 4.0