Caple CR13400 - Manual (Page 11)

11
GAS CONNECTION
The gas supply must be connected to
the gas inlet which is located at the rear
of the appliance as illustrated in the fig-
ure 3.1
If the connection pipe cross the cooker,
it must be positioned under the cooker
rear protection (fig. 3.1).
When screwing the connecting tube
operate with two spanners (fig. 3.2).
After connecting to the mains, check
that the coupling are correctly sealed,
using soapy solution, but never a
flame.
Fig. 3.2
gas pipe
cooker
rear protection
Fig. 3.1