Caple CR13400 - Manual (Page 6)

6
Fig. 2.1
2 - Location
FOR THE INSTALLER
50 mm
650 mm
500 mm
450 mm
This cooker has class “2/1” overheating protection so that it can be installed next
to a cabinet.
The appliance must be kept no less than 50 mm away from any side wall which exceed
the height of the hob surface (fig. 2.1).
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetical material and the glue used must be resistant to a tempera-
ture of 90°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in
a room containing a bath or shower.
Curtains must not be fitted immediately behind appliance or within 500 mm of the
sides.
It is essential that the cooker is positioned as stated below.
If the cooker is located on a pedestal it is necessary to provide safety measures to pre-
vent falling out.
The cooker must be installed by a qualified technician and in compliance with
local safety standards.