Comtech EF Data CDD-880 - Manual (Page 46)

CDD-880 Multi Receiver Router Revision 1
Rear Panel Connections MN-CDD880
3–10
3.3.2 115V/230V Alternating Current (AC) Power Interface (Standard)
Figure 3-5. CDD-880 AC Power Interface
3.3.2.1 AC Operation – Applying Power
Figure 3-6. Applying AC Power to the CDD-880
To apply AC power to the CDD‐880:
• First, plug the provided AC power cord female end into the unit.
• Then, plug the AC power cord male end into the user‐supplied power source.
• Finally, switch the unit ON.
Feature Description
1 On / Off Switch
2 Press‐fit Fuse Holder
3 IEC Three‐prong Connector
AC Power Specifications
Input Power 40W maximum, 20W typical
Input Voltage
100V to 240V AC, +6%/‐10%, autosensing
(total absolute max. range is 90V to 254V AC)
Connector Type IEC
Fuse Protection
Line and neutral fusing
(2X) T3.15A 20mm Slow‐blow type fuses