Comtech EF Data CDD-880 - Manual (Page 83)

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–23
5.4.4.3.3 Configuration | ACM
Use this page to configure CDD‐880 ACM (Adaptive Coding Modulation) operations.
Figure 5‐12. Configuration | ACM page
ACM Demodulator Settings
For each operating demodulator, note the following selections on a per‐column basis from left
to right:
• Demod # – This is the available "FILLED" demodulator slot (automatically assigned in pairs
per each installed dual demodulator card).
• ACM Enable – Click to option button to enable or disable ACM operation.
• Remote CDM‐840 IP Address – Enter the CDM‐840 Remote Router IP Address in the form
XXX.XXX.XXX.XXX. Click [Submit] to save.