Comtech EF Data CDM-750 - Manual (Page 228)

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Appendix B MN-CDM750
B–2
B.1.1 Typical PIIC Module Installation
Figure B-1. Typical PIIC Module Installation
Follow these steps to install the optional PIIC module(s) (Figure B‐1):
Step Task
1 Remove the PIIC slot blank panel(s) by loosening the captive thumbscrews.
2 Install the PIIC module(s) into position using the chassis’ internal card guides. Slide
the module straight back into the chassis until the module is firmly plugged into the
mating receptacle(s).
3 Secure the captive thumbscrews of the module(s).