Comtech EF Data DTMX5000 SpectraCast - Manual (Page 145)

Central Configuration Unit DTMX5000 IP Gateway
Rev. 1 B-9
B.6.3 Installing the CCU Application
Note: Prior to installing the CCU application, Microsoft Data Access Objects
must be installed, as described in the previous section Installing Data Access
Objects.
To install the CCU application, proceed as follows:
1. Insert the CCU installation CD-ROM into the computer’s CD-ROM drive.
2. Double-click the Setup.exe file under the root directory of the CD-ROM.
The CCU installation window is displayed.
3. Click Next in the Installation window.
4. Follow the installation instructions displayed on the screen.
5. When installation is complete, a new directory called CCU is created. This
directory contains the program files.
Note: Following installation, the CCU must be configured, as described in
Configuring the CCU.