Comtech EF Data DTMX5000 SpectraCast - Manual (Page 58)

Operation DTMX5000 IP Gateway
Rev. 1 3–22
3.4.2 Write Parameters to CFG.INI without Reset
Select this option to save the changes without resetting the Gateway. The changes do not
take effect until the unit is restarted. Manually restart the Gateway for the changes to
affect the unit’s operation.
To write the parameters to CFG.INI without resetting the Gateway, proceed as follows:
1. In the Main menu, select Configuration. The Configuration menu opens.
2. Select Option 4. Write Parameters to CFG.INI without Reset. The edited
CFG.INI file will not affect the unit’s operational functions until the
unit is restarted.
Note: When the CFG.INI file is edited, it is also possible to discard the changes
and preserve the original configurations.