Comtech EF Data CIM-300L - Manual (Page 46)

CiM-300L IP Enabled Satellite Modem Rev. 1
Installation CD/CIM300L.IOM
20
2.3.10 RF I
NPUT
C
ONNECTOR
(CP3)
CP3 is a Type N connector for an RX IF signal. The input impedance is 75 Ω (Optional:
50 Ω). The input return loss is ≥ 10 dB from 950 to 1750 MHz.
2.3.11 AC P
OWER
C
ONNECTOR
A standard, detachable, non-locking, 3-prong power cord (IEC plug) supplies the
Alternating Current (AC) power to the modem. Observe the following:
Input Power 55 W maximum, 40 W typical
Input Voltage 90 to 132 or 175 to 264 Vac
Unit switches ranges automatically.
Connector Type I.E.C
Fuse Protection 1 A SLO-BLO
Line and neutral fusing
5 mm type fuses
2.3.12 G
ROUND
C
ONNECTOR
(GND)
A #10-32 stud on the rear panel of the modem is used for connecting a common chassis
ground among all equipment.
Note The AC power connector provides the safety ground.