Faults/alarms – common – Comtech EF Data CIM-300L User Manual
Page 71
Advertising

CiM-300L IP Enabled Satellite Modem
Rev. 1
Front Panel Menus
CD/CIM300L.IOM
45
Faults/Alarms – Common
DISPLAY SELECTIONS/DESCRIPTION
COMMON
▓------
Note: “-” indicates status of parameter is OK.
“+” indicates a fault.
Reverse contrast “+” indicates an
alarm
BATTERY CLOCK
▓------
Battery or clock fault
-12 VOLT SUPPLY
-▓-----
-12 Vdc power supply fault
+12 VOLT SUPPLY
--▓----
+12 Vdc power supply fault
+5 VOLT SUPPLY
---▓---
+5 Vdc power supply fault
SELF TEST
----▓--
Built in self test fault
CONTROLLER
-----▓-
Controller fault. Typically indicates the
controller has gone through a power on/off
cycle
IP MODULE
------▓
IP module fault. Typically indicates that the IP
module will not program
Advertising