Comtech EF Data CIM-300L - Manual (Page 94)

CiM-300L IP Enabled Satellite Modem Rev. 1
Serial Remote Control CD/CIM300L.IOM
68
>add/?ER4_modem in local mode'cr''lf']
(Modem in local error; send the REM command to go to remote mode.)
>add/?ER5_hard coded parameter'cr''lf']
(Error message indicating that the parameter is hardware dependent and may not
be changed remotely.)
Note: “add” is used to indicate a valid 1 to 3 character device address in the range between 1
and 255.
Example: Command: <3/REM_
Response: >3/REM_
5.3.4 E
ND
C
HARACTER
Each message is ended with a single character which signals the end of the message:
! “cr” Carriage return character for commands
! “]” End bracket for responses