Comtech EF Data SNM-1010L - Manual (Page 125)

SNM-1010L Data/Control Modem Revision 0
User Port Operation MN/SNM1010L.OM
This command enables the SNM-1010L transmitter.
4.3.7.1 Command Format
RF_ON'cr'
4.3.7.2 Local Command Responses
None.
4.3.8 Transmitter Off (RF_OFF)
This command disables the SNM-1010L transmitter.
4.3.8.1 Command Format
RF_OFF'cr'
4.3.8.2 Local Command Responses
None.
4.3.9 Transmit Power (TX)
This command sets the SNM-1010L transmit power.
4.3.9.1 Command Format
TX <tx_power>'cr'
<tx_power> In the range of 0 to -40 dBm, in 0.1 dBm steps.
The format for TX_power is [+] XX.X with an implied minus sign.
4.3.9.2 Local Command Responses
transmit power = <tx_power>
4–7