Comtech EF Data SNM-1010L - Manual (Page 148)

SNM-1010L Data/Control Modem Revision 0
User Port Operation MN/SNM1010L.OM
<tx_mod> and
<rx_mod> Modulation.
Values:
Modulation
Type Code
BPSK B
QPSK Q
OQPSK O
8PSK 8
<origin_clock> and
<dest_clock> Clock Source.
Values:
Clock
Source Code
Terrestrial (TT) T
Internal (ST) I
Satellite (RT) S
<grade_of_service> Optional coding method indicator.
Values:
Coding
Method Code
Viterbi V (default)
Sequential S
Turbo T
4.3.16.1.2 Local Command Responses
<none> Command received OK, will be sent to the NMS.
Error <code> : <description>
Code Description
9 Channel <Channel No.> Invalid
20 Not enough parameters.
4.3.16.2 Pre-defined Data Circuit Call (DC)
The user initiates a data call by specifying a pre-defined circuit. The circuit must be
pre-defined at the NMS.
4.3.16.2.1 Command Format
<channel_no> DC <circuit_id>’cr’
<channel_no> Prefix channel number. (Optional)
Valid range: 0 (or omitted)
DC Pre-defined data circuit call.
<circuit_id> Pre-defined circuit id at the NMS.
Valid range: 1 through 9999.
4–14