Comtech EF Data SNM-1010L - Manual (Page 238)

SNM-1010L Data/Control Modem Revision 0
Remote Control Channel Commands/Responses MN/SNM1010L.OM
A.10.1 Messages from NMS
CONGESTION Channel cannot be assigned because there is no satellite spectrum space
available.
BUSY Destination end is busy.
NO CONNECT <error code> NMS was not able to complete the connection.
Error Type
Failure Terminate .
Invalid Request.
CONNECT
Received when a connection is made.
DISCONNECT <result code> Received when a connection is broken.
Result Type Code
Path Ok.
0
Calling Party Busy.
1
Failure Terminate .
2
Invalid Request.
3
Normal Termination.
4
Network Busy.
5
Critical Fault.
6
channel no> CS <calling phone number>
<called phone number>
<status>
<cause>
<subcause>
Call Status
<phone number> Calling phone number
<dest node> Destination Node Id
<dest channel> Destination Channel No.
<status> Description
0 Path Ok
1 Channel busy
2 Failure
3 Invalid phone number
4 Normal Termination
5 Network Busy
6 Critical Fault
<cause> and Information only
<subcause>
MM <phone_no> <message> Multipoint Message
<phone_no> Source connection phone
number or zero.
<message> Message from source node.
A–40