Cable installation – Comtech EF Data DST User Manual
Page 30
Advertising
Digital Satellite Terminal System
Revision 2
Installation
MN/DST.IOM
2–6
2.3.3 Cable
Installation
Note: Prior to connecting the cables, ensure that the ODU and LNB voltages have been
switched off.
1. Connect RX L-Band cable from the LNB to the IDU CP3 connector.
2. Connect TX L-Band cable from the BUC to the IDU CP1 connector.
Figure 2-2. Typical ODU Unit Installation
.
TRF
LNB
RX L-band
Cable
TX L-band
Cable
BUC
Upper
Bracket
Lower “L”
Bracket
Advertising