Comtech EF Data DST - Manual (Page 36)

Digital Satellite Terminal System Revision 1
Block Up Converter MN/DST.IOM
3–6
3.4 ODU Installation
Refer to Figure 3-2.
1/2-inch Box Wrench (or adjustable)
5/16-inch Box Wrench (or adjustable)
7/16-inch Box Wrench (or adjustable)
7/64-inch SAE Allen
M3 Metric Allen Wrench
Screw Driver Phillips
3.5 BUC Installation
CAUTION
After removing the protective covers, ensure that no foreign material or
moisture enter
3.5.1 Mounting Kits
Table 3-3. Optional: C-Band Mounting Kit, KT/5738-1
(BUC to OMT)
QTY Part No. Nomenclature
8 03P1097 Bolt, Hex, 10-32x1, SS
1 FP/5195 Gasket, CPR137-FULL
8 HW/1-32HEXNUT Nut, Hex, 10-32, SS
16 HW/10-FLT Washer, Flat, No. 10, SS
8 HW/10-SPLIT Washer, Split Lock, No. 10, SS
1 HW/GKT-CPR137G Gasket, CPR137-Half
Table 3-4. Optional: Ku-Band Mounting Kit, KT/8924-1
(BUC to OMT)
QTY Part No. Nomenclature
3 32P1037 O-Ring
3 32P1039 O-Ring
4 HW/6-32 HEXNUT #6 Nut
4 HW/6-32x7/8 SHCS #6 Socket screw
8 HW/6-FLT #6 Washer, Flat
4 HW/6-SPLIT #6 Washer, Split
8 HW/8-FLT #8 Washer, Flat
8 HW/8-SPLIT #8 Washer, Split
4 HW/M4x12SHCS M4 x 12 Socket Screw
4 HW/M4x25SHCS M4 x 25 Socket Screw