2 snmp interface, 1 management information base (mib) files, 2 snmp community strings – Comtech EF Data LBC-4000 User Manual

Page 79

Advertising
background image

LBC-4000 L-Band Up/Down Converter System with Ethernet

Revision 2

Ethernet-based Remote Product Management

MN-LBC4000A

6–3

6.2

SNMP Interface

The  Simple  Network  Management  Protocol  (SNMP)  is  an  Internet‐standard  protocol  for 
managing  devices  on  IP  networks.  An  SNMP‐managed  network  consists  of  three  key 
components: 
 

•

The managed device. This includes the LBC‐4000. 
 

•

The SNMP Agent. The software that runs on the LBC‐4000. The LBC‐4000 SNMP Agent 
supports both SNMPv1 and SNMPv2c. 
 

•

The user‐supplied Network Management System (NMS). The software that runs on the 
manager. 

6.2.1

Management Information Base (MIB) Files

MIB  files  are  used  for  SNMP  remote  management  of  a  unique  device.  A  MIB  file  consists  of  a 
tree  of  nodes  called  Object  Identifiers  (OIDs).  Each  OID  provides  remote  management  of  a 
particular function. These MIB files should be compiled in a user‐supplied MIB Browser or SNMP 
Network Monitoring System server. The following MIB files are associated with the LBC‐4000: 
 

MIB File/Name
(where ‘x’ is revision
letter)

Description

FW-0000235x.mib
ComtechEFData
Root MIB file

ComtechEFData MIB file gives the root tree for ALL Comtech EF Data products and
consists of only the following OID:
Name: comtechEFData
Type: MODULE-IDENTITY

OID: 1.3.6.1.4.1.6247
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)

Module: ComtechEFData

FW-0020542.mib
LBC-4000 MIB file

MIB file consists of all of the OID’s for management of the amplifier functions

FW-0020543.mib
LBC-4000 Traps MIB
file

Trap MIB file is provided for SNMPv1 traps common for LBC-4000.

6.2.2

SNMP Community Strings

 

In  SNMP  v1/v2c,  the  SNMP  Community  String  is  sent  unencrypted  in  the  SNMP 
packets. Caution must be taken by the network administrator to ensure that SNMP 
packets travel only over a secure and private network if security is a concern.  

The  LBC‐4000  uses  Community  Strings  as  a  password  scheme  that  provides  authentication 
before  gaining  access  to  the  LBC‐4000  agent’s  MIBs.  They  are  used  to  authenticate  users  and 
determine access privileges to the SNMP agent. 

Advertising