DAHON Service Manual - Manual (Page 21)

NOTE:
Only turn the adjustment bolt in small increments
(e.g. an 1/8 turn) each time, otherwise it could result
in too much constriction and/or movement.
NOTE:
Before you can adjust the adjustment bolt, loosen
and remove the safety screw.
Version B
Tools Needed: • 6mm Allen key • 2.5mm Allen key
Do not put too much force on the adjustment bolt.
Tightening the adjustment bolt too much could result
in damage to the meshing mechanism, which will
eventually affect the functionality of the LockJaw and
your safety
Do not over-loosen the adjustment bolt.
If it is too loose, the LockJaw hinge will not close
securely, which will result in a loose join.
To tighten the adjustment bolt, turn it
clockwise when looking at the bolt
head-on.
To loosen the adjustment bolt, turn it
counter-clockwise when looking at the
bolt head-on.
Adjust the Adjustment Bolt
while the frame is closed.
Checking for the correct tension of the
LockJaw, close and open the OC bolt.
If the OC bolt closes with a slight “click”
at the end, the tension is just right.
TIGHTEN
LOOSEN
OPEN
CLOSE
Open OC Bolt and turn it counter-clockwise
180°.
Once you have achieved thecorrect tension,
insert and tighten the safety screw.
2.5 mm Allen key
DO NOT open frame
Loosen the safety screw by turning it
counter-clockwise.
Remove safety screw.
21