DAHON Service Manual - Manual (Page 7)

WARNING:
Check to see if the clamps are
facing the outside; properly
aligned to the stem mount T-bar.
VRO Stem
With a VRO clamp, the handlebar can be easily
adjusted to fit the rider’s height or desired riding
position by simply moving it up and down, forward
and backward. The following instructions explain
how to adjust the VRO clamp.
Step 3 - Adjust the height and position of the
handlebar to attain your preferred riding position.
Move the VRO clamp within the window of
adjustment - front, backwards, up and down.
Step 4 - When you have established your desired
position, proceed to tighten the bolts of the VRO
clamps using a torque of 10 Nm.
Step 2 -Using a 5mm Allen key, loosen the bolts
of theVRO clamps.
NOTE:
Check to see that the angle of the handlebar
allows immediate access to the brake levers.
WARNING:
If you are unsure of how to make
proper adjustments to your bicycle,
seek a qualified bicycle technician
for professional adjustments.
07
Step 5 - Putting Allen key into tool box.
Step 1 - Taking 5mm Allen Key out of tool box.