DAHON Service Manual - Manual (Page 23)

The Kore I-beam is a ground-breaking new saddle system.
As well as dramatically cutting down weight, the system
allows the rider to achieve maximum saddle adjustability.
The saddle can be moved forward and backward on the rail,
while the tilt can be adjusted up or down.
Step 1 - With a 4mm Allen wrench, loosen
the Kore I-beam seat rail clamp Step 4 - Adjust the fore and aft position.
Step 3 - Adjust the tilt of the saddle.
Step 2 - Fit the saddle to the rails. Step 5 - Tighten the pre-greased bolts
to 85 in/lbs or 9.5 NM.
Tools Needed: • 4mm Allen key
23
Kore I-Beam