DAHON Service Manual - Manual (Page 25)

WARNING:
If you are unsure of how to make
proper adjustments to your bicycle,
seek a qualified bicycle technician for
professional advice on adjustments.
The low-profile Dahon Neos derailleur was specially designed for small-wheeled bicycles. The
Neos allows much more ground clearance than a conventional derailleur. Using cache technology,
it permits the derailleur body to lie flat underneath the chain stays. This way the derailleur body only
projects 12mm from the chain stays and is much more protected
than a standard derailleur , which
protrudes up to 40mm.
Due to its special design, the Dahon Neos
derailleur differs from that of a conventional
derailleur.
The Neos is alligned in the opposite
direction (i.e. the adjustment screws and the
wire adjustment bolt are facing forward), but
you can adjust it like any other derailleur.
Please follow the instructions below.
Dahon Neos Derailleur
Conventional Derailleur Dahon Neos Derailleur
Wire Fastening Bolt
High Adjustment Screw
Adjustment Screws
Wire Adjustment Bolt
Low Adjustment Screw Wire Tension
Adjustment Bolt
25