Daktronics DakStats Baseball Software - Manual (Page 24)

18 In Game Operations
 Catcher Interference
 Umpire Interference
 Error on Foul Ball
 Turn Left
 Turn Right
3. Click the ENTER button or press [Enter] on the keyboard to record the play.
At Bat Text
The At Bat tab also displays
the at bat text and game
summary for the current
batter (Figure 14). This is
primarily used for monitoring
the text sent to electronic
displays and when
broadcasting games over the Internet. Refer to the DakStats Baseball Software Display
Manual (
DD1533474 ) for more information about configuring batter text.
Batted Ball
After a batter hits the ball, there are two options for continuing to record the play:
 Select the Batted Ball tab or press [F2].
 Select the In Play option from the At Bat tab.
Either method will open the Batted Ball tab (Figure 15).
Select the type of hit by clicking the onscreen buttons or pressing the appropriate keys.
Note: Some screens will require all fields to be filled in before it is possible to click
ENTER or press the [Enter] key. Certain buttons are only visible during specific
situations, such as when other runners are on base.
 Single F9, Double F10, Triple F11: After selecting a single, double, or triple, enter a
Hit To location by typing in a position or clicking on the baseball field illustration.
 Homerun F12: If a batter hits a homerun as shown in Figure 16:
 Type in or click where the homerun was Hit To.
 Type in the Distance of the hit if desired.
 Select if the homerun was Over the Fence, or Inside Park.
Figure 14: At Bat Text
Figure 15: Batted Ball Tab