DFI PIC-H61 - Manual (Page 15)

www.dfi .com
15
Chapter 2 Hardware Installation
Chapter 2
These jumpers are used to select the power of the USB ports. Selecting +5V_standby will al-
low you to use a USB device to wake up the system.
USB Power Select
USB 2-5
(JP2)
2-3 On: +5V_
standby
1-2 On: +5V
(default)
1
3
2
1
3
2
2-3 On: +5V_
standby
1 3 2
1-2 On: +5V
(default)
1 3 2
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
USB 0-1
(JP5)
2-3 On: +5V_
standby
1-2 On: +5V
(default)
1
3
2
1
3
2
KB/MS Power Select
(JP3)
JP3 is used to select the power of the PS/2 keyboard and PS/2 mouse ports. Selecting +5V_
standby will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.
Important:
The +5VSB power source of your power supply must support ≥720mA.