Chapter 3 – DFI PIC-H61 User Manual

Page 29

Advertising

www.dfi .com

Chapter 3 BIOS Setup

Chapter 3

CPU Configuration

This section is used to configure the CPU. It will also display the detected CPU

information.

Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When disa-
bled only one thread per
enabled core is enabled.

CPU Confi guration

Intel (R) Core (TM) i7-3770 CPU @ 3.40GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit

L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache

Hyper-threading

Active Processor Cores
Intel Virtualization Technology

Advanced

306a8
10
3400 MHz
1600 MHz
3400 MHz
4
Supported
Supported
Supported
Supported

32 kB x 4
32 kB x 4
256 kB x 4
8192 kB

[Enabled]

[All]
[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

SATA Configuration

This section is used to configure SATA functions.

Hyper-threading

Enable this field for Windows XP and Linux which are optimized for Hyper-Threading

technology. Select disabled for other OSes not optimized for Hyper-Threading technol-

ogy. When disabled, only one thread per enabled core is enabled.

Active Processor Cores

Number of cores to enable in each processor package.

Intel Virtualization Technology

When this field is set to Enabled, the VMM can utilize the additional hardware capabili-

ties provided by Vanderpool Technology.

Enable or disable SATA
Device.

SATA Controller(s)

SATA Mode Selection

Serial ATA Port 0
Software Preserve
Serial ATA Port 1
Software Preserve
Serial ATA Port 4
Software Preserve
Serial ATA Port 5
Software Preserve

Advanced

SATA Controller(s)

This field is used to enable or disable the Serial ATA channels.

SATA Mode Selection

IDE Mode

This option configures the Serial ATA drives as Parallel ATA storage devices.

[Enabled]

[IDE]

Empty
Unknown
Empty
Unknown
Empty
Unknown
Empty
Unknown