DFI CP100-NRM - Manual (Page 65)

65
3
BIOS Setup
Enable ACPI Auto Configuration
Enables or disables the BIOS ACPI auto configuration.
ACPI Sleep State
Selects the highest ACPI sleep state that the system will enter when the
Suspend button is pressed. The options are Suspend Disabled, S1 (CPU Stop
Clock) and S3 (Suspend to RAM).
Resume by PME
When Enabled, the system uses the PCI PME (Power Management Event) sig-
nal (PCI, PCIE, LAN) to remotely wake up the system.
Resume by Ring
Set this field to Enabled to use the modem ring-on function. This will allow
your system to power-on to respond to calls coming through an external or
internal modem.
ACPI Power Management Configuration
This section is used to configure the ACPI power management.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
ACPI Power Management Configuration
Enable ACPI Auto Configuration
ACPI Sleep State
Resume by PME
Resume by Ring
Resume by RTC Alarm
Advanced
[Disabled]
[S3 (Suspend to R...)]
[Disabled]
[Disabled]
[Disabled]
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Enables or Disables BIOS
ACPI Auto Configuration.