Datalogic Scanning MATRIX 1000 - Manual (Page 43)

SOFTWARE CONFIGURATION
33
3
Parameters to verify/modify:
Operating mode Sets the parameters which customize the reader operating
mode starting from three main modes:
One-shot: acquires a single image based on the selected
value for the Acquisition Trigger and Delayed Triggers.
Continuous: continuously acquires images with a rate up to
30 frames per second depending on the decoding time.
Phase Mode: acquires images during the reading phase
depending on the selected value for the Acquisition Trigger
and Delayed Triggers. The Phase-ON and Phase-OFF
events mark respectively the beginning and end of the
reading phase.
Calibration Calibrates the acquisition parameters to maximize the
reading performance (see par. 3.4.2)
Communication Configures the parameters relative to each serial port
regarding the transmission, message formatting and string
receiving.
Any change to the VisiSet™ communication port
parameters (baud rate, data bits, etc.) is effective as soon
as the reader is disconnected from VisiSet™.
Decoding Sets the decoding parameters shared by several code
symbologies.
1D & 2D, Postal
Codes
Sets the characteristics of the code symbologies to be read.
Data Collection Defines the code-collection parameters and the output
message format.
Digital I/O Configures the reader input/output parameters.
Verifier Sets the verifier mode to compare the read code to a user-
defined database.
Miscellaneous Sets the reader name and the saved image format.