Digi-Star SW2600EID - Manual (Page 32)

SW2600EID
32 D3718
SHORT FORM CALIBRATION
Short Form Setup & Calibration procedure allows changing “SETUP” and
“CAL” numbers of indicator.
Setup Number
The “SETUP” numbers affects some parameters that also appear in Long
Form Calibration. Following is a list of functions controlled by “SETUP”
number:
Weigh Method (W MTHD)
Display Units (LB-KG)
Display Counts (COUNT)
Gain
Scale Capacity
Calibration Number
The “CAL” number adjusted to make scale read proper weight for different
load cells and to make accuracy adjustments on scale system. If a
StockWeigh indicator provided with StockWeigh load cells as a package,
calibration number adjusted at factory for maximum accuracy. Systems
that are assembled from separate components are given “STANDARD
SETUP AND CALIBRATION NUMBERS” and are not factory calibrated.
These systems should be checked and adjusted if necessary using known
weights to insure accuracy. See “Calibrating the Scale for Maximum
Accuracy” below.
List of Standard Setup and Calibration numbers for StockWeigh 3300,
6600, 10000 and 14000 load cells shown below. If not using StockWeigh
load cells, contact Digi-Star Tech Support at 920-563-9700 for setup and
calibration information:
StockWeigh
Scale Type Unit Setup # Calibration #
3300 Lbs 413004 776
6600 Lbs 413007 1560
10000 Lbs 454010 14000
14000 Lbs 443015 13828
3300 Kg 812002 352
6600 Kg 812003 708
10000 Kg 854010 6351
14000 Kg 843007 6272