Advanced features, Create cue point labels, Return to live video – DNF Controls 4040CL-EVS-PBIO User Manual
Page 13: On the st400
4040CL-EVS-PBIO, 300 Clip Fast Access System, EVS DDRs
Page 13 of 26
Advanced Features . . .
13. CREATE CUE POINT LABELS
Use LABELS mode to assign meaningful names to cue points. LABELS provides a faster and
easier method to select cue points.
ON THE ST400
a.
In Setup Menu, turn LABEL MODE on.
b.
Select cue point to label.
c.
Press the [LABEL] key.
d.
Manually enter a label, up to 8 characters in length, using the numeric keypad, or PC
keyboard.
e.
Press the [ENTER] to assign the entered label to the selected cue point.
OR
[ENTER] on the PC keyboard.
OR
[NEXT CUE] or [LAST CUE].
NOTE - Labels are saved in non-volatile memory in the ST400. They are not saved in the video
server.
14. RETURN TO LIVE VIDEO
a.
Make sure Record set to “Crash” in the menu.
b.
Press [REC] key. The corresponding CAM clip will be loaded, the video returns to live.
OR
Press [SHIFT] + [REC] to switch to live video.
Press [SHIFT] + [REC] repeatedly to toggle between camera angles.